|1220*2440mm, 1220*1830, 2050*3050, 1220*2440mm And So On, Custom Size
|Acrylic,100% Acrylic New Material
|High Surface Hardness & Glossy
|Full-Automatic Production Lines,Dust-Free Workshop
4x8 Fluorescent Green Acrylic Sheet,
4x8 Fluorescent Green Plexiglass,
Plexiglass Green Acrylic Sheet
4x8 Plexiglass Fluorescent Green Acrylic Sheet Extruded Perspex Panels
Fluorescent green Plexiglass Acrylic Sheet 4x8 extruded perspex panels cut to size near me
1. Acrylic fluorescent sheet
Acrylic fluorescent plates are mainly used in the outer layer of LED panels, and many businesses use acrylic fluorescent plates to make many beautiful handicrafts, and the products themselves have high light transmittance.
The transparent acrylic board glue adhesive cannot be exposed to direct sunlight for a long time before it is completely cured. If it is irradiated for a long time, the adhesive surface will turn yellow from time to time, which will affect the aesthetics of the plexiglass products. is better. The bonding surface of the acrylic board should be cleaned. If there are impurities such as dust pores, bubbles will be generated during bonding, and the glue will flow unevenly. Ordinary acrylic sheets will deform when the temperature is about 100 degrees, and acrylic products processed above this temperature will lose the unique characteristics of acrylic.
|ISO 1183-1:2012 Method A
|EN ISO 527:2012
|EN ISO 527:2012
|Tensile Strain at Break
|EN ISO 527-1:2012
|ISO 62:2008 Method 1
|Total Luminous Transmittance
|Vicat Softening Temperature
|ISO 306:2013 Method B50
|Light Ageing Test- UV Exposure
|Grey scale: 5
|ISO 4892-3:2016 Cycle 1
|Mean Coefficient of Linear Thermal Expansion
|Compressive Stress at Yield
|EN ISO 604:2003
|Compressive Yield Strength
|Deflection Temperature under Load
|ASTM D648-18 Method B
3. The process of making acrylic sheet
Acrylic sheet processing static electricity, in summer or the acrylic processing workshop with high dryness is easy to generate static electricity, attracting dust. When cleaning, it should be wiped with a soft cotton cloth dipped in soapy water or water. After the acrylic has been glued, do not directly touch the wind on the edge. If the wind blows quickly, it will dry quickly, but the edge will turn white due to rapid volatilization. When acrylic products are bonded, because the glue is highly corrosive, if it is dropped on the surface, it will leave traces that are difficult to remove. So be sure to use something to protect the places that don't need bonding.
4. Acrylic sheet Application
7. Package and shipping
7.1. One piece of acrylic sheet package: double-sided covered with kraft paper or PE film, the cover film does not have any LOGO of our company.
7.2. Tray package: the total weight of each pallet is about 2 tons, the bottom is wooden pallet or iron pallet, and the surrounding is packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about 3000 pieces) 20-foot container, 10-12 pallets.
Contact Person: Jason